Copyright: Wuhan Nanxing Power Technology Co., Ltd. 鄂ICP备06008607号
Website:300.cn Wuhan
NDBZT-III self-injection tester
basic information
Detailed parameters
Reference standard: DL/T624-1997, JJG1112-2015.
Features:
● Display the status of each switch on the main wiring diagram, voltage and current are displayed and changed in real time;
● The jump and closing contacts of each switch can be freely set to the connection mode;
● Set the voltage value of the incoming and busbars when there is pressure and no pressure, and the current value when there is flow and no flow;
● Identify the status after the self-injection action, display the main wiring diagram and voltage and current changes;
● It can simulate a variety of accident causes and can perform self-injection testing under various conditions;
● Record the cause of the accident, the action content and the action time after each action.
● It can test the behavior of self-injection when the incoming line resumes power supply;
● The pre-equipment can be tested if the device is self-injected or the switch device is rejected or the action is incorrect.
● It has up to 14 channels of input and 14 channels of output required for self-injection testing.
The main parameters:
Test output current
|
AC6A
|
Test output voltage
|
57V/100V
|
Four 12-phase power frequency voltage
|
0 to 120V (line voltage)
|
Four 4-phase power frequency voltage
|
0 to 120V (line voltage)
|
Provide self-directed DC
|
DC110V or 220V
|
Maximum number of analog transformers
|
3 Sets
|
Maximum number of analog circuit breakers
|
10 Sets
|
Maximum number of analog voltage transformers
|
12 Sets
|
Maximum number of analog current transformers
|
7 Sets
|
Operating Voltage
|
AC 220V±10%,50HZ±1HZ
|
Dimensions
|
320mm×200mm×240mm
|
Weight
|
About 4kg
|
keywords:
On a
NDMDY-III analog circuit breaker tester
The next article
ND-802 Three-phase microcomputer relay protection tester